Skip to content
FreeBuildToolsLandscaping materials

Pavers · TOOL-09

Paver sand calculator

Calculate bedding sand on its own, with joint sand added only when you provide the paver and joint geometry.

Working calculator: every number is computed on this page, in your browser, as you type — no account, no server, no tracking. Prices you enter are examples only; results are planning estimates, not contractor quotes.

Paver sand calculator · TOOL-09

Runs in your browser

Your inputs

Paving area and bedding sand

Bedding sand is calculated separately from joint sand. Waste applies to bedding sand.

Bedding sand depth in inches.

Extra for loss. Above 25% flagged.

Optional. Subtracted before ordering.

Joint sand (optional)

Joint sand is calculated only when all of paver length, paver width, joint width and joint depth are entered. Otherwise it stays “not calculated”. No undocumented coverage assumption is used.

Optional.

What your supplier sells - all optional
Your prices - optional, illustrative

Charged once per placed order (bedding).

Density - optional, for tonnage only

Enter your supplier's density to estimate US tons - otherwise tonnage stays “not calculated”. No density is assumed.

Results

Start with an area

Enter the paving length and width on the left. The documented example is a 12 ft × 10 ft patio with 1 in bedding sand.

Project basket · this browser only

Local storage

Project basket

Quantities, stock and prices are saved in this browser only. Edit them below, remove lines you no longer need, or download a CSV for your files. Nothing is sent to a server.

Your basket is empty. Use “Add … to basket” on a calculator result to save a line here.

What it calculates

Bedding volume, loss allowance, bag or bulk rounding, and a clearly separate optional joint estimate.

How the calculation works

  1. Bedding sand volume = paved area × bedding depth in inches ÷ 12, in cubic feet. Cubic yards = cubic feet ÷ 27.
  2. Waste allowance is a separate, editable line applied to bedding sand: required bedding volume = bedding volume × (1 + waste %).
  3. Bedding sand already on hand is subtracted from the requirement, floored at zero.
  4. Joint sand is calculated only when paver length, paver width, joint width and joint depth are all supplied. The estimate uses the documented approximation: area × joint depth × joint width × (1/paver length + 1/paver width) ÷ 12. Without those inputs, joint sand is “not calculated”, never zero.
  5. Bedding and joint sand are independent components. Their volumes are never combined before package rounding.
  6. Bag and bulk orders round up independently for each material: packages = ceil(need ÷ package size). Leftover = purchased − need.
  7. Estimated cost = packages × your price + delivery, charged once per placed order. Prices are examples you type in.
  8. Tonnage is computed only from a density you enter yourself (lb/ft³ or tons/yd³). Without a density, tonnage is “not calculated”, never zero.

Limitations

  • Joint sand is an approximation based on paver and joint dimensions; real joint volume depends on pattern, compaction and installation. The method is stated here.
  • No joint-sand estimate is produced without paver and joint geometry. No undocumented coverage assumption is used.
  • Bedding and joint sand are planned and sold here by volume first. Weight and tonnage require a density you supply.
  • Results are purchasing estimates, not contractor quotes, and costs use only the prices you type in.

Free resource

Download the RES-04 — Paver base & sand planning guide for offline planning, or browse the full resource library.

Verified worked example

Example
Documented worked example for the paver sand calculator.
12 ft × 10 ft bedding at 1 in depth10 ft³ before waste
Joint sand estimateNot calculated without paver and joint geometry

Documented example from the project blueprint, verified by automated golden tests. Enter your own dimensions in the live calculator above.

Mulch bed cross-sectionSide view of a mulch layer over soil. The layer spans the bed area's length, and its depth is measured in inches. Volume in cubic feet equals the bed area in square feet times the depth in inches divided by twelve.mulch layerbed area = length × width (ft²)depth, inbed length (ft)ft³ = ft² × depth(in) ÷ 12cubic yards = ft³ ÷ 27
Original diagram. The layer's depth is the added depth after any existing mulch is subtracted.