Skip to content
FreeBuildToolsLandscaping materials

Pavers · TOOL-08

Paver base calculator

Size a compacted aggregate base, including an optional edge overbuild, without pretending to be an engineering code check.

Working calculator: every number is computed on this page, in your browser, as you type — no account, no server, no tracking. Prices you enter are examples only; results are planning estimates, not contractor quotes.

Paver base calculator · TOOL-08

Runs in your browser

Your inputs

Paving footprint

Length and width of the paved area. Edge overbuild adds the same amount to both sides of each dimension.

Added to both sides of each dimension: adjusted = L + 2e.

Installed base depth in inches.

Allowances

Compaction and waste are separate, editable planning allowances - never applied twice.

Planning allowance; not a universal engineering formula.

Extra for cuts/loss. Above 25% flagged.

Optional. Subtracted before ordering.

What your supplier sells - all optional
Your prices - optional, illustrative

Charged once per placed order.

Density - optional, for tonnage only

Enter your supplier's density to estimate US tons - otherwise tonnage stays “not calculated”. No density is assumed.

Results

Start with a footprint

Enter the paving length and width on the left. The documented example is a 12 ft × 10 ft patio at 4 in base depth.

Project basket · this browser only

Local storage

Project basket

Quantities, stock and prices are saved in this browser only. Edit them below, remove lines you no longer need, or download a CSV for your files. Nothing is sent to a server.

Your basket is empty. Use “Add … to basket” on a calculator result to save a line here.

What it calculates

Adjusted footprint, installed and loose volume, conditional tonnage and rounded supplier units.

How the calculation works

  1. Original footprint = length × width, in square feet.
  2. Edge overbuild e applies to both sides of each dimension: adjusted length = L + 2e, adjusted width = W + 2e, adjusted area = (L + 2e) × (W + 2e). The overbuild is never added twice.
  3. Installed (compacted) volume = adjusted area × depth in inches ÷ 12, in cubic feet. Cubic yards = cubic feet ÷ 27.
  4. Compaction allowance is a separate, editable planning line: loose after compaction = installed × (1 + compaction %).
  5. Waste allowance is a separate, editable line applied on top: loose material to order = loose after compaction × (1 + waste %).
  6. Installed and loose volumes are always reported separately, and compaction is applied only once.
  7. Base material already on hand is subtracted from the loose requirement, floored at zero.
  8. Bag and bulk orders round up independently: packages = ceil(need ÷ package size). Leftover = purchased − need. Rounding happens once, at this final step, with a small tolerance.
  9. Estimated cost = packages × your price + delivery, charged once per placed order. Prices are examples you type in.
  10. Tonnage is computed only from a density you enter yourself (lb/ft³ or tons/yd³). Without a density, tonnage is “not calculated”, never zero.

Limitations

  • Edge overbuild is a planning allowance you control; the calculator does not advise a correct overhang for any project.
  • Compaction and waste percentages are planning allowances you control; the calculator does not imply engineering code compliance.
  • Base material is planned and sold here by volume first. Weight and tonnage require a density you supply.
  • Results are purchasing estimates, not contractor quotes, and costs use only the prices you type in.

Free resource

Download the RES-04 — Paver base & sand planning guide for offline planning, or browse the full resource library.

Verified worked example

Example
Documented worked example for the paver base calculator.
12 ft × 10 ft patio at 4 in base depth40 ft³
In cubic yards (before compaction)1.48148148 yd³
Engineering complianceNot implied

Documented example from the project blueprint, verified by automated golden tests. Enter your own dimensions in the live calculator above.

Mulch bed cross-sectionSide view of a mulch layer over soil. The layer spans the bed area's length, and its depth is measured in inches. Volume in cubic feet equals the bed area in square feet times the depth in inches divided by twelve.mulch layerbed area = length × width (ft²)depth, inbed length (ft)ft³ = ft² × depth(in) ÷ 12cubic yards = ft³ ÷ 27
Original diagram. The layer's depth is the added depth after any existing mulch is subtracted.