TOOL-06
Beds & planting · TOOL-06
Topsoil calculator
Set a target depth per bed, subtract the soil already there, and add a settlement allowance you control.
Working calculator: every number is computed on this page, in your browser, as you type — no account, no server, no tracking. Prices you enter are examples only; results are planning estimates, not contractor quotes.
Results
Start with an area
Enter at least one bed area on the left. The documented example is a 10 ft × 10 ft bed, desired 3 in, existing 1 in.
Project basket
Quantities, stock and prices are saved in this browser only. Edit them below, remove lines you no longer need, or download a CSV for your files. Nothing is sent to a server.
Your basket is empty. Use “Add … to basket” on a calculator result to save a line here.
What it calculates
Added depth per bed, net volume, allowance volume, rounded units, conditional tonnage and cost.
How the calculation works
- Areas you mark “include” are added together; areas you mark “exclude” are subtracted. The result is the net bed area in square feet.
- Added depth = max(0, desired depth − existing depth), both in inches. When existing depth covers the target, the added depth is zero - not an error.
- Installed volume = net area × added depth ÷ 12, in cubic feet. This is the in-place volume before allowances.
- Settlement allowance is a separate, editable planning line: after settlement = installed × (1 + settlement %).
- Waste allowance is a separate, editable line applied on top: required volume = after settlement × (1 + waste %). The two are never applied twice or merged.
- Topsoil you already have on hand is subtracted from the requirement, floored at zero.
- Bag and bulk orders round up independently: packages = ceil(need ÷ package size). Leftover = purchased − need. Rounding happens once, at this final step, with a small tolerance.
- Estimated cost = packages × your price + delivery, charged once per placed order. Prices are examples you type in.
- Tonnage is computed only from a density you enter yourself (lb/ft³ or tons/yd³). Without a density, tonnage is “not calculated”, never zero.
Limitations
- Shapes carry no positions, so overlapping shapes cannot be detected.
- Settlement and waste percentages are planning allowances you control; the calculator does not advise correct values for any climate or soil.
- Topsoil is planned and sold here by volume first. Weight and tonnage require a density you supply.
- Existing-depth subtraction assumes uniform depth across the bed. Real beds vary; measure several points.
- Results are purchasing estimates, not contractor quotes, and costs use only the prices you type in.
Free resource
Download the RES-01 — Landscape measurement worksheet for offline planning, or browse the full resource library.
Related tools
| 10 ft × 10 ft bed, target 3 in, existing 1 in | 16.6666667 ft³ |
| Before allowance | Added depth only |
Documented example from the project blueprint, verified by automated golden tests. Enter your own dimensions in the live calculator above.